Geosynthetic Clay Liner (GCL)
Geosynthetic Clay Liner
GEOSYNTHETIC CLAY LINER (GCL) is an engineered hydraulic barrier consisting of high-swelling sodium bentonite encapsulated between layers of mass-produced under controlled geotextile, which are needle-punched uniformly together across the entire GCL. This forms a uniform, multi-directional, shear-resistant hydraulic barrier with self-sealing and re-heating characteristics, meeting the slope stability demands commonly found in mining applications
Features
- Provide a hydraulic barrier against many leachates
- Constricts the flow paths of water, resulting in a low permeability hydraulic barrier
- Provide easier installation in varying weather conditions
- Faster deployment
- Requires less material / lower carbon foot print
Applications
- Waste and contaminated soil caps
- Landfill base liners
- Gas and vapour seals
- Surface impoundment liners
- Secondary containment
- Dams, canals, and water courses
- Tailings containment
- Groundwater protection
- Vertical barriers
- Waterproofing
Key facts: THAIKN™ Geosynthetic Clay Liner (GCL)
| Construction | Sodium bentonite between needle-punched geotextiles |
|---|---|
| Models | GCL 4000 · GCL 5300 |
| Bentonite mass/area (ASTM D 5993) | ≥ 3,600 g/m² (GCL 4000) · ≥ 5,000 g/m² (GCL 5300) |
| Index flux (ASTM D 5887) | ≤ 5×10⁻⁹ m³/m²/s |
| Thickness (ASTM D 5199) | ≥ 6 mm (GCL 4000) · ≥ 7.0 mm (GCL 5300) |
| Roll size | Custom-made on order (roll size to suit the project) |
| Quality system | ISO 9001:2015 (TIS 9001-2559) by MASCI, certificate no. QMS23004/1837 |
Values from THAIKN Technical Data Sheets (TDS). Ask our team for project-specific test values.
Frequently asked questions
What is a GCL?
A geosynthetic clay liner (GCL) is a hydraulic barrier of bentonite held between geotextiles that are needle-punched together.
Where is GCL used?
Leak prevention in ponds, wastewater ponds, landfills and groundwater protection.
What is the difference between GCL 4000 and GCL 5300?
Bentonite content and thickness. GCL 4000 has ≥ 3,600 g/m² bentonite and is ≥ 6 mm thick; GCL 5300 has ≥ 5,000 g/m² and is ≥ 7.0 mm thick. Both have an index flux of ≤ 5×10⁻⁹ m³/m²/s.
Can the roll size be made to order?
Yes. Rolls are custom-made on order. Contact our team: Tel. 02-096-3998, 063-467-9666, 063-401-9888 · Email sale@thaikn.co.th · LINE @thaikn