Case Study: Lake Waterproofing with HDPE 1.5 mm and GCL
โพสต์เมื่อ : 20 พ.ย 2569 เวลา 13:17 น.
THAIKN A specialist in waterproofing large housing-estate lakes
A project to waterproof a large housing-estate lake with a two-layer system of HDPE geomembrane and a geosynthetic clay liner



Waterproofing a large housing-estate lake
Waterproofing a large housing-estate lake with a two-layer system
Products used Waterproofing plastic sheet THAIKN™ GEOMEMBRANE HDPE 1.5 mm and a geosynthetic clay liner THAIKN™ GEOSYNTHETIC CLAY LINER (GCL)
In a housing-estate project, the central area was designed around a large lake, as a feature of the development and to give residents a more pleasant setting. The original construction drawings specified GCL alone as the pond lining to prevent leakage. From experience on similar projects, however, the ThaiKN team judged that using GCL on its own could pose a long-term leakage risk.

In a housing-estate project, the central area was designed around a large lake, as a feature of the development and to give residents a more pleasant setting. The original construction drawings specified GCL alone as the pond lining to prevent leakage. From experience on similar projects, however, the ThaiKN team judged that using GCL on its own could pose a long-term leakage risk.

To give greater confidence and a longer service life, ThaiKN therefore recommended adding a 1.5 mm HDPE sheet as the first layer, serving as the primary waterproofing system, and covering it with a 4,000 gsm GCL as a backup layer, so that the bentonite in the GCL can seal a leak if the HDPE is damaged. A 30 cm soil fill was also placed on top, to help protect the materials from UV, impact and to give the pond a more natural appearance.
The project chose this method because it wanted the pond to hold water 100% and to blend in with the surrounding landscape, rather than looking like a plastic pond. The two-layer waterproofing system also greatly reduces the chance of leakage, even if one of the material layers is damaged.
To give greater confidence and a longer service life, ThaiKN therefore recommended adding a 1.5 mm HDPE sheet as the first layer, serving as the primary waterproofing system, and covering it with a 4,000 gsm GCL as a backup layer, so that the bentonite in the GCL can seal a leak if the HDPE is damaged. A 30 cm soil fill was also placed on top, to help protect the materials from UV, impact and to give the pond a more natural appearance.
The project chose this method because it wanted the pond to hold water 100% and to blend in with the surrounding landscape, rather than looking like a plastic pond. The two-layer waterproofing system also greatly reduces the chance of leakage, even if one of the material layers is damaged.
The project chose this method because it wanted the pond to hold water 100% and to blend in with the surrounding landscape, rather than looking like a plastic pond. The two-layer waterproofing system also greatly reduces the chance of leakage, even if one of the material layers is damaged.


